Panasonic PT-JW130FWE - Page 113

Chapter 5 Operations — Web control function
ENGLISH - 113
Connecting with wired LAN
6
1
3
4
5
2
1 [DHCP ON], [DHCP OFF]
To enable the DHCP client function, set [DHCP ON].
2 [IP ADDRESS]
Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]
Enter the default gateway address when not using a DHCP
server.
5 [DNS1], [DNS2]
Enter the primary DNS/secondary DNS server address when
you do not use a DHCP server.
Available characters: Numbers (0 - 9), period (.)
(Example: 192.168.0.253)
6 [Back] button, [Next] button
Click the [Back] button to return to the previous screen. Click
the [Next] button to display a screen to conrm the settings.
Click the [Submit] button to update the settings.
Note
f When you use the “Forward” or “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click
[Network cong] again as the subsequent operations will not be guaranteed.
f Changing LAN settings while connected to the LAN may cause the connection to cut out.
Connecting with wireless LAN (M-DIRECT)
6
5
4
3
1
2
1 [IP ADDRESS]
Enter the IP address.
2 [SUBNET MASK]
Enter the subnet mask.
3 [SSID]
Set SSID to be used with M-DIRECT.
4 [CHANNEL]
Set the channel to be used with M-DIRECT.
5 [KEY]
Set the key to be used with M-DIRECT.
Enter 8 to 63 alphanumeric characters or 64-digit hexadecimal.
6 [Back] button, [Next] button
Click the [Back] button to return to the previous screen. Click
the [Next] button to display a screen to conrm the settings.
Click the [Submit] button to update the settings.