Panasonic PT-JW130FWE

Chapter 5 Operations — Content Manager
180 - ENGLISH
Uploading a schedule
Upload a backed up schedule from the client computer (only Windows computer/Mac are supported) to the
projector.
r [Data management] page
1
2
5
4
3
6
7
1 Upload le [Add] button
Adds upload target data.
Click this to display the le selection screen.
2 Upload data deletion icon
Click this to enter the deletion mode. Select data you want to
cancel upload, and delete it.
3 Upload data
Displays upload target data in a list.
4 [Upload] - [Includes setting information]
If this check box is selected, the system setting information
included in upload data is also uploaded.
5 Upload data addition progress
Displays the progress by comparing the number of saved data
items when backup was obtained with the number of added
upload target data items.
6 [Upload] button
Writes upload target data in the SD card of the projector.
7 [Undo] button
Clears upload target data.
r Procedure
1) Click the [Data management] tab.
f The [Data management] page is displayed.
2) Click the upload file [Add] button.
f The le selection screen is displayed.
3) Select a backup file to upload, and click the [Open] button.
f The le name is displayed in the upload data list.
f Go back to Step 2) to continue to add another backup le, or go to Step 4) to cancel upload of a le, and
then when you nish adding all backup les necessary to upload, proceed to Step 6).
4) If there is a file you want to cancel upload, click
.
f The mode changes to deletion mode.