70 - ENGLISH
4) Press the <ENTER> button.
f A check mark is displayed on the left of the item selected in Step 3).
f Proceed to Step 5) when [Ready] or [Shut down] is selected.
5) Press as to select [Timer].
6) Press the <ENTER> button.
7) Press as to switch the setting time of [Timer].
f The setting time will switch each time you press the button.
f The time until the power management function works can be set to any value from 1 minute to 30 minutes in increments
of 1 minute.
f Proceed to Step 8) when [Ready] is selected in Step 3).
8) Press the <MENU> button.
9) Press as to select [Ready Countdown].
10) Press the <ENTER> button.
11) Press as to switch the setting time of [Ready Countdown].
f The items will switch each time you press the button.
f The waiting time before the projector switches from the ready state to the standby state can be set from 1 minute to 30
minutes in increments of 1 minute.
f When set to [0 Min], the projector will stay at the ready state instead of entering standby state.
[Filter counter]
Check the usage time of the air lter and set the cleaning cycle of the air lter. Also, the usage time of the air lter can be reset.
1) Press as to select [Filter counter].
2) Press the <ENTER> button.
f The [Filter counter] screen is displayed.
3) Press as to switch the item.
f The items will switch each time you press the button.
[Filter counter]
Displays the usage time of the lter.
[Timer]
Sets the cleaning cycle of the lter.
[Filter counter
reset]
Resets the usage time of the lter.
Setting [Timer]
If you want to clean the air lter periodically, set the cycle time. Once the usage time of the lter reaches the set time, the lter
warning icon [ ] is displayed on the projected screen.
1) Press as to select [Filter counter].
2) Press the <ENTER> button.
f The [Filter counter] screen is displayed.
3) Press as to select [Timer].
4) Press the <ENTER> button.
5) Press as to switch the setting of the time.
f The items will switch each time you press the button.
[Off] → [100 H] → [200 H] → [300 H]
f The lter warning icon [ ] will not be displayed if [Timer] is set to [Off].
[Filter counter reset]
1) Press as to select [Filter counter].
2) Press the <ENTER> button.
f The [Filter counter] screen is displayed.
Chapter 4 Settings - [Expand] menu
To Next Page
Loading...
