ENGLISH - 71
3) Press as to select [Filter counter reset].
4) Press the <ENTER> button.
f The [Filter counter Reset?] screen is displayed.
5) Press as to select [Yes] and then press the <ENTER> button.
f The [OK?] screen is displayed.
6) Press as to select [Yes] and then press the <ENTER> button.
[Test pattern]
Displays the Test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input signal before
performing various adjustments.
1) Press as to select [Test pattern].
2) Press the <ENTER> button.
f The [Test pattern] screen is displayed.
3) Press as to switch the item.
[Off]
Test pattern is not displayed.
[Gray scale 1]
Select a test pattern so that it is easy to make various adjustments.
[Gray scale 2]
[Gray scale 3]
[Gray scale 4]
[Color bar]
[Red]
[Green]
[Blue]
[Cross hatch]
[White]
[Black]
[Raster gray]
4) Press the <ENTER> button.
f The selected test pattern is displayed and the menu screen is disappeared.
Note
f Press the <MENU> button to display the menu screen and select [Off] in [Test pattern] when you want to cancel displaying of
the test pattern.
[Network]
(Only for PT-LW375D, PT-LW335D, PT-LB425D, PT-LB425T, PT-LB385D, PT-LB385T, PT-LB355D and PT-LB355T)
Perform network setting before using the network function.
[Network setting]
Perform the connection setting to use wired LAN. For wireless LAN setting, please refer to “When connecting via wireless
LAN”(x page 83).
1) Press as to select [Network].
2) Press the <ENTER> button.
f The [Network] screen is displayed.
3) Press the <ENTER> button.
f The [Network setting] screen is displayed.
Chapter 4 Settings - [Expand] menu
To Next Page
Loading...
