66 - ENGLISH
Resetting the correction state of [Keystone]
(Only for PT-LW375D, PT-LW335D, PT-LB425D, PT-LB425T, PT-LB385D, PT-LB385T, PT-LB355D and PT-LB355T)
Cancel the state corrected with the screen adjustment function, and return to factory default.
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select [Reset value].
4) Press the <ENTER> button.
f The state of the keystone correction is canceled.
[Logo]
Set logo selection, user logo registration and logo operation security.
1) Press as to select [Logo].
2) Press the <ENTER> button.
f The [Logo] screen is displayed.
3) Press as to switch the item.
f The items will switch each time you press the button.
[Logo select]
Select the logo to be displayed at projector start-up.
[Capture]
Register the user logo. The projected image will be captured and used as a logo to be displayed at
projector start-up.
[Logo PIN code
lock]
Prevent the logo from being changed by any person other than the administrator by setting a
three-digit Logo PIN code.
[Logo PIN code
change]
Change the Logo PIN code.
[Logo select]
Select the logo to be displayed at projector start-up.
1) Press as to select [Logo].
2) Press the <ENTER> button.
f The [Logo] screen is displayed.
3) Press as to select [Logo select].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[Off]
Displays only the countdown at projector start-up.
[Default]
Displays the Panasonic logo and the countdown at projector start-up.
[User]
*1
Displays only the image registered by the user at projector start-up.
*1 [User] will be unavailable when no user logo is registered.
Note
f [Logo Select] cannot be set if [Logo PIN code lock] is set to [On].
[Capture]
Register the user logo to be displayed at projector start-up.
1) Press as to select [Logo].
2) Press the <ENTER> button.
f The [Logo] screen is displayed.
Chapter 4 Settings - [Expand] menu
To Next Page
Loading...
