About Your Projector
18
- ENGLISH
Preparation
Rear terminals
Control panel
(1) VIDEO IN
Connect to VIDEO input signals.
(2) COMPUTER IN / COMPONENT IN / S-VIDEO IN
Connect to COMPUTER IN / COMPONENT IN /
S-VIDEO input signals.
(3) SERIAL IN
Connect to a computer via an RS-232C cable.
(4) Security slot
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
(3) <AUTO SETUP> Button
Execute the setting of Auto setup in the [setting]
menu.
(4) < > Button
Turn the projector on/off.
(5) <STANDBY(R)/ON(G)> indicator
Indicate the power status.
(6) <MENU> Button
Display the MENU screen. (
Æ
page 33)
(7) <LAMP> indicator
Light yellow when the projection lamp reaches its
end of life.
(8) <WARNING> indicator
Indicate the abnormal conditions of the projector.
(1)
(3)
(2)
(1)
(2)
(4)
(5)
(6)
(3)
(7)
(8)
(1) <SELECT> Button
Execute the selected item.
(2) ▲▼◄► Buttons
Navigate the MENU screen.
SERIAL IN
COMPUTER IN /
COMPONENT IN
VIDEO IN
S-VIDEO IN
(4)
To Next Page
Loading...
