Panasonic PT-LX22EA - STANDBY(R);ON(G) Indicator

Powering ON/OFF
ENGLISH -
25
Basic Operation
STANDBY(R)/ON(G) indicator
The <STANDBY(R)/ON(G)> indicator informs you the status of the power. Conrm the status of the
<STANDBY(R)/ON(G)> indicator before operating the projector.
STANDBY(R)/ON(G) indicator
Indicator status Status
No illumination or ashing The power cord is unplugged.
RED
Lit
The power cord is plugged.
The projector is in stand-by mode, after the cooling is completed.
Flashing
The projector cannot be turned on until the normal power-off processing for fan
cooling is completing and the <STANDBY(R)/ON(G)>indicator stops blinking.
The temperature inside the projector is abnormally high. And the <WARNING>
indicator also blinks in red.
(
Æ
page 55)
The projector cannot be turned on until
cooling is completing and the <STANDBY(R)/ON(G)> indicator stops blinking.
GREEN
Lit Projecting.
Flashing The projector is in the Power management mode.