24
- ENGLISH
Basic Operation
Powering ON/OFF
Basic Operation
Picture (2)
Picture (3)
Connecting the power cord
Be sure to insert the attached power cord securely to its base to prevent it from coming off.
Power cord holder
J
A power cord holder is designed to prevent the AC power cord from coming off the projector.
Please insert the power cord into the power cord holder correctly as Picture (1) shown:
Picture (1)
Attaching
J
Attach the AC power cord with the power cord clamps to the projector as follows:
Press the clamps on its sides, and then insert the AC power cord with the power cord clamps securely to the
projector as Picture (2) shown. It is correctly attached until you hear the "CLICK" sound. See Picture (3) for
correct attachment.
Removal
J
Remove the AC power cord from the electrical outlet while pressing the clamps on its sides.
AC Power cord holder
Clamp
To Next Page