Panasonic PT-LX22EA - Closed Caption; Count up

Setting
50
- ENGLISH
Settings
Mode
J
Press ▲▼ button to select one mode 1 )
among the items as below.
Count up
The [P-timer] display 000:00
appears on the screen and the
count up starts (000:00-180:00)
Count down
The time set in the [Timer] setting
appears on the screen and the
countdown starts.
Timer
J
Press ▲▼ to select [Timer] and then 1 )
press the <SELECT> button.
Press▲▼ to set the [Timer](1-180 Min).2 )
Timer is available in [Count down] only. Factory
z
default value is 10 Min.
Execute
J
Press ▲▼ to select one among the 1 )
items as below and then press the
<SELECT> button.
Start It executes the [count up] or [count
down] function.*
1
Reset Reset the P-timer values.*
2
Exit To exit the P-timer operation.
Press the <SELECT> button at [Start] and the *1 :
indication changes into [Stop]. To stop [Count up]
or [Count down], press the <SELECT> button at
[Stop] on the [screen] menu, then the indication
changes into [Restart]. Press the <SELECT>
button at Restart to resume Count up or Count
down.
Press the <SELECT> button at Reset to return to *2 :
the following value:
Count up "000:00"
Count down Timer that you set
Attention
To stop the [P-timer] function, press the <P-TIMER>
z
button.
To cancel the [P-timer], press and hold the <P-TIMER>
z
button for a few seconds.
Closed caption
[Only for NTSC, 480i input]
Press ▲▼ to select [Closed caption].1 )
Press ► or the <SELECT> button to 2 )
enter the submenu.
Closed caption
J
Press ▲▼ to select [Closed caption] 1 )
and then press the <SELECT> button.
Press ▲▼ to select [Off], [CC1], [CC2], 2 )
[CC3] or [CC4].
Color
J
Press ▲▼ to select [Color] and then 1 )
press the <SELECT> button.
Press▲▼ to select color or white.2 )
Attention
The closed caption is mainly used in the north America.
z
This function shows the text information contained in the
image signal. Captions may not be displayed on some
devices or software.
You can select [Closed caption] when [NTSC] or [480i]
z
signals are input.
Part of characters may not displayed when high
z
compensation valued are set in [Keystone].
Closed captions are not displayed while the menu screen
z
appears.