Chapter 4 Settings — [TEST PATTERN] menu
ENGLISH - 131
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x page 79) for the operation of the menu screen.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input
signal before performing various adjustments.
1) Press qw to switch the [TEST PATTERN] item.
f The items will switch each time you press the button.
Menu screen + Color bar
(vertical)
Displays a test pattern with the menu screen. Select a desired test pattern.
Menu screen + Color bar
(horizontal)
Menu screen + 16 tones
(vertical 1)
Menu screen + 16 tones
(vertical 2)
Menu screen + 16 tones
(horizontal 1)
Menu screen + 16 tones
(horizontal 2)
Menu screen + Focus
Menu screen + 16:9/4:3
aspect frame
Menu screen + All white
Menu screen + All black
Menu screen + Input screen
Displays the menu screen and input signal.
Internal test patterns are not displayed.
Note
f Press the <ON SCREEN> button on the remote control while the test pattern is displayed to hide the menu screen.
To Next Page
Loading...
