Panasonic PT-MW630

ENGLISH - 17
Features of the Projector
High luminance and high contrast
▶ With a unique optical system which uses
a new-generation laser light source, and
the laser light source drive system, high
luminance of 6 500 lm
*1
and high contrast
of 3 000 000:1
*2
are achieved even with its
compact size.
*1 A value for PT-MZ670 and PT-MW630. A value for
PT-MZ570 and PT-MW530 is 5 500 lm.
*2 When [PICTURE MODE] is set to [DYNAMIC], and
[DYNAMIC CONTRAST] is set to [1] or [2]
Easy and highly exible setup
▶ In addition to the lens replacement method
and equipping of the lens shift, usage
in a wide range of application is made
possible by supporting a wide range of
interfaces such as DIGITAL LINK, and by
supporting the 360° installation utilizing the
characteristics of solid-sate light source.
Long life and high reliability
▶ The maintenance cost for long-term
operation is reduced by the unique light
source cooling control technology and
improvement of the dust resistance.
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(x page 35)
2. Connect with external devices.
(x page 51)
3. Connect the power cord.
(x page 57)
4. Switch on the projector.
(x page 59)
5. Make initial settings.
(x page 60)
f Take this step when you switch on the
power for the rst time after purchasing the
projector.
6. Select the input signal.
(x page 66)
7. Adjust the image.
(x page 67)