Panasonic PT-MZ11K

Chapter 4 Settings — [PROJECTOR SETUP] menu
132 - ENGLISH
r PT-MZ20K
[LIGHT OUTPUT] (%) Brightness (lm) Estimated runtime
*1
(hours)
100.0 20 000 20 000
80.0 16 000 21 500
60.0 12 000 23 000
40.0 8 000 25 000
*1 Estimated runtime is the time until the brightness decreases to approximately half of the time of delivery when the projector is used with the
[PICTURE] menu → [DYNAMIC CONTRAST] set to [3] and under environment of 0.15 mg/m
3
dust.
30.0
25 00024 00023 00022 00021 00020 000
40.0
8 000
50.0
60.0
70.0
80.0
90.0
100.0
20 000
r PT-MZ17K
[LIGHT OUTPUT] (%) Brightness (lm) Estimated runtime
*1
(hours)
100.0 16 500 20 000
80.0 13 200 21 500
60.0 9 900 23 000
40.0 6 600 25 000
*1 Estimated runtime is the time until the brightness decreases to approximately half of the time of delivery when the projector is used with the
[PICTURE] menu → [DYNAMIC CONTRAST] set to [3] and under environment of 0.15 mg/m
3
dust.
30.0
25 00024 00023 00022 00021 00020 000
40.0
6 600
50.0
60.0
70.0
80.0
90.0
100.0
16 500
r PT-MZ14K
[LIGHT OUTPUT] (%) Brightness (lm) Estimated runtime
*1
(hours)
100.0 14 000 20 000
80.0 11 200 21 500
60.0 8 400 23 000
40.0 5 600 25 000
*1 Estimated runtime is the time until the brightness decreases to approximately half of the time of delivery when the projector is used with the
[PICTURE] menu → [DYNAMIC CONTRAST] set to [3] and under environment of 0.15 mg/m
3
dust.
30.0
25 00024 00023 00022 00021 00020 000
40.0
5 600
50.0
60.0
70.0
80.0
90.0
100.0
14 000
Estimated runtime (hours)
[LIGHT OUTPUT] (%)
Brightness (lm)
Estimated runtime (hours)
[LIGHT OUTPUT] (%)
Brightness (lm)
Estimated runtime (hours)
[LIGHT OUTPUT] (%)
Brightness (lm)