Panasonic PT-MZ11K

Chapter 5 Operations — Web control function
ENGLISH - 189
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display eld of the [Projector status]
screen, click it to display the content of the error/warning.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
1
2
1 Display of error information
Displays the alphanumeric symbols and content of errors/
warnings that occur.
Refer to “[SELF TEST] indications” (x page 247) for the
display details.
2 Error code
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
1
3
2
4
1
3
2
1 [WIRED LAN (IPv4)]
Displays the settings of wired LAN (IPv4).
2 [WIRED LAN (IPv6)]
Displays the settings of wired LAN (IPv6).
3 [WIRED LAN COMMON INFORMATION]
Displays the common information of wired LAN (IPv4) and wired
LAN (IPv6).
4 [WIRELESS LAN]
Displays the settings of wireless LAN when the optional
Wireless Module (Model No.: AJ-WM50 Series) is attached.