Chapter 3 Basic Operations — Switching on/o the projector
60 - ENGLISH
r PT‑MZ14K
[LIGHT OUTPUT] (%) Brightness (lm) Estimated runtime
*1
(hours)
100.0 14 000 20 000
80.0 11 200 21 500
60.0 8 400 23 000
40.0 5 600 25 000
*1 Estimated runtime is the time until the brightness decreases to approximately half of the time of delivery when the projector is used with the
[PICTURE] menu → [DYNAMIC CONTRAST] set to [3] and under environment of 0.15 mg/m
3
dust.
30.0
25 00024 00023 00022 00021 00020 000
40.0
5 600
50.0
60.0
70.0
80.0
90.0
100.0
14 000
r PT‑MZ11K
[LIGHT OUTPUT] (%) Brightness (lm) Estimated runtime
*1
(hours)
100.0 11 000 20 000
80.0 8 800 21 500
60.0 6 600 23 000
40.0 4 400 25 000
*1 Estimated runtime is the time until the brightness decreases to approximately half of the time of delivery when the projector is used with the
[PICTURE] menu → [DYNAMIC CONTRAST] set to [3] and under environment of 0.15 mg/m
3
dust.
30.0
25 00024 00023 00022 00021 00020 000
40.0
4 400
50.0
60.0
70.0
80.0
90.0
100.0
11 000
Note
f The runtime may be shorter than the estimation due to the inuence of characteristics of each light source, conditions of use, installation
environment, etc.
f If the runtime exceeds 20 000 hours, replacement of the components inside the projector may be required. Consult your dealer for details.
Estimated runtime (hours)
[LIGHT OUTPUT] (%)
Brightness (lm)
Estimated runtime (hours)
[LIGHT OUTPUT] (%)
Brightness (lm)