M
Mary BurchSep 3, 2025
What to do if image from a computer does not appear on Panasonic PT-RZ120BEJ Projector?
- AAlejandra HuntSep 3, 2025
If you're not getting an image from your computer on the Panasonic Projector, consider these points: * Check if the cable is too long. For D-Sub cables, the length should be 10 m (32'10") or shorter. * Verify that the external video output on the laptop is set correctly. (For example, you might need to press “Fn” + “F3” or “Fn” + “F10” simultaneously. Refer to your computer's user manual for specific instructions, as this varies by model.)












