ENGLISH - 11
Read this rst!
Each dimension inside the hazard distance (within RG3 range) for combination with projection lens which the
hazard distance exceeds 1 m (39-3/8") is as follows.
(Unit: m)
Projection lens
Model No.
HD
*1
D1
*2
D2
*2
D3
*2
D4
*2
ET-D75LE30 2.1 0.6 0.6 0.68 0.68
ET-D75LE40 2.5 0.38 0.38 0.43 0.43
ET-D75LE8 4.9 0.46 0.46 0.53 0.53
*1 HD: Hazard Distance
*2 The values of D1 to D4 will change in accordance with the lens shift amount. Each value in the table is the maximum value.
Note
f
The value in the table is based on IEC 62471-5:2015.
To Next Page
Loading...
