Panasonic PT-RZ12K

Chapter 4 Settings — [PROJECTOR SETUP] menu
148 - ENGLISH
Deleting a lens memory
1) Press as to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press as to select [LENS MEMORY EDIT].
4) Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
5) Press as to select [LENS MEMORY DELETE].
6) Press the <ENTER> button.
f The [LENS MEMORY DELETE] screen is displayed.
7) Press as to select the item to delete, and press the <ENTER> button.
8) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Changing the lens memory name
1) Press as to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press as to select [LENS MEMORY EDIT].
4) Press the <ENTER> button.
f The [LENS MEMORY EDIT] screen is displayed.
5) Press as to select [LENS MEMORY NAME CHANGE].
6) Press the <ENTER> button.
f The [LENS MEMORY NAME CHANGE] screen is displayed.
7) Press as to select the name to change, and press the <ENTER> button.
f The [LENS MEMORY NAME INPUT] screen is displayed.
8) Press asqw to select the text, and press the <ENTER> button to enter the text.
9) After the name is changed, press asqw to select [OK], and press the <ENTER> button.
f The registration completes and returns to the [LENS MEMORY NAME CHANGE] screen.
f If you press asqw to select [CANCEL] and then press the <ENTER> button, the changed name will not
be registered.
f If you press asqw to select [DEFAULT] and press the <ENTER> button, the changed name will not be
registered and the default name will be used.
f If you select [OK] without entering any characters and press the <ENTER> button, the default name will be
used.
[STATUS]
Display the status of the projector.
1) Press as to select [STATUS].
2) Press the <ENTER> button.
f The [STATUS] screen is displayed.
3) Press qw to switch the pages.
f The page will change each time you press the button.
[PROJECTOR TYPE] Displays the projector type and serial number of the projector.
[PROJECTOR RUNTIME] Displays the runtime of the projector.
[LIGHT RUNTIME] Displays the runtime of the light source 1 and the light source 2.
[MAIN/SUB VERSION] Displays the main and sub versions of the rmware of the projector.