Panasonic PT-RZ12K

Chapter 2 Getting Started — Setting up
38 - ENGLISH
Standard status
Projection
lens Model
No.
Only [KEYSTONE] used [KEYSTONE] and [CURVED] used together Only [CURVED] used
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Min. value of
R2/L2
Min. value of
R3/L3
Min. value of
R2/L2
Min. value of
R3/L3
ET-D75LE6 ±28 ±15 ±10 ±10 1.6 3.9 0.9 2.3
ET-D75LE8 ±40 ±15 ±20 ±15 0.2 0.4 0.2 0.3
ET-D75LE10 ±40 ±15 ±20 ±15 1.1 2.6 0.6 1.5
ET-D75LE20 ±40 ±15 ±20 ±15 0.9 1.7 0.5 1.0
ET-D75LE30 ±40 ±15 ±20 ±15 0.6 1.2 0.4 0.7
ET-D75LE40 ±40 ±15 ±20 ±15 0.4 0.7 0.2 0.4
ET-D75LE50 ±22 ±15 ±8 ±8 2.0 4.9 1.2 2.9
ET-D75LE90
*1
+5 / - 0 0 ― ― ― ― ― ―
*1 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen.
When using the optional Upgrade Kit (Model No.: ET-UK20)
Projection
lens Model
No.
Only [KEYSTONE] used
*1
[KEYSTONE] and [CURVED] used together Only [CURVED] used
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Min. value of
R2/L2
Min. value of
R3/L3
Min. value of
R2/L2
Min. value of
R3/L3
ET-D75LE6 ±28 ±15 ±10 ±10 1.2 3.0 0.7 1.7
ET-D75LE8 ±45 ±40 ±20 ±15 0.2 0.3 0.1 0.2
ET-D75LE10 ±40 ±40 ±20 ±15 0.9 2.0 0.5 1.1
ET-D75LE20 ±40 ±40 ±20 ±15 0.7 1.3 0.4 0.7
ET-D75LE30 ±45 ±40 ±20 ±15 0.5 0.9 0.3 0.5
ET-D75LE40 ±45 ±40 ±20 ±15 0.3 0.5 0.2 0.3
ET-D75LE50 ±22 ±15 ±8 ±8 1.5 3.7 0.9 2.2
ET-D75LE90
*2
+5 / - 0 0 ― ― ― ― ― ―
*1 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
*2 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen.
Note
f When [GEOMETRY] is used, the focus of the entire screen may be lost as correction increases.
f Make the curved screen a circular arc shape with one part of a perfect circle removed.
f Adjustment range of the [GEOMETRY] items may not match the listed projection range depending on the projection lens. Use this projector
within the projection range, otherwise the correction may not work.