Setting up
ENGLISH -
21
Getting Started
Adjusting front adjustable feet
Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.
Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet
clockwise.
To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise.
(You can adjust the projection angle vertically.)
Attention
Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust
z
the front adjustable feet.
If keystone distortion occurs on the projected image, perform “KEYSTONE” from the “Screen” menu. (
z
Æ
page 45)
Note
Screw up the adjustable feet, and an audible click will be heard as the limit.
z
Adjustable Feet
Adjustable range
Front adjustable feet : 43.5 mm(1.713")
To Next Page
Loading...
