Panasonic PT-VX41

Technical Information
82
- ENGLISH
Appendix
Serial terminal
The serial connector which is on the connector panel of the projector conforms to the RS-232C interface
specication, so that the projector can be controlled by a personal computer which is connected to this connector.
J
Connection
J
Pin assignments and signal names
D-Sub 9-pin (male)
Outside view
Pin No. Signal name Contents
— NC
RXD Received data
TXD Transmitted data
— NC
GND Earth
— NC
— NC
— NC
— NC
J
Communication conditions
Signal level RS-232C-compliant Character length 8 bits
Sync. method Asynchronous Stop bit 1 bit
Baud rate 19 200 bps X parameter None
Parity None S parameter None
Note
When [AMX D. D.] function is set to [On] under the [Network] menu, the Baud rate will change to 9 600 bps
z
automatically.
D-Sub 9-pin (female)
D-Sub 9-pin (male)
Connecting terminals
on projector
Communication cable
Computer