Specications
Model No. PT-VX41E
Power supply
AC100 V - 240 V 50 Hz/60 Hz
Power consumption
100 V - 240 V 3.8 A-1.8 A 322 W
When [Standby mode] of [Setting] is set to [Eco]: 0.48W
When [Standby mode] of [Setting] is set to [Network]: 10.0W
When [Standby MIC out] of [Sound] is set to [On]: Max.26 W
LCD panel
Panel size
1.6 cm (0.63")
(aspect ratio 4 : 3)
Display method
3 transparent LCD panels (RGB)
Drive method
Active matrix method
Pixels
786 432
(1 024 x 768) x 3 panels
Lens
Manual zoom (1.2x) / Manual focus
F 1.60 to 1.76, f 22.33 mm to 26.80 mm
Luminous lamp
245 W UHM lamp
Light output *
1
4 000 lm
Applicable
scanning
frequency
*
2
for RGB signal
Horizontal 15 kHz to 100 kHz, Vertical 50 Hz to 100 Hz
Dot clock frequency: 140 MHz or less
for YP
B
P
R
signal
[525i(480i)] Horizontal 15.75 kHz, Vertical 60 Hz
[525p(480p)] Horizontal 31.5 kHz, Vertical 60 Hz
[750(720)/60p] Horizontal 45 kHz, Vertical 60 Hz
[1 125(1 080)/60i] Horizontal 33.75 kHz, Vertical 60 Hz
[625i(576i)] Horizontal 15.63 kHz, Vertical 50 Hz
[625p(576p)] Horizontal 31.25 kHz, Vertical 50 Hz
[750(720)/50p] Horizontal 37.5 kHz, Vertical 50 Hz
[1 125(1 080)50i] Horizontal 28.13 kHz, Vertical 50 Hz
HD/SYNC and V terminals are not compliant with 3 value composite SYNC
z
for Video signal
(including S-video)
Horizontal 15.75 kHz / 15.63 kHz, Vertical 50 Hz / 60 Hz
for HDMI signal
525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1 125(1 080)/60p, 1 125(1 080)/50p, 1
125(1 080)/60i, 1 125(1 080)/50i
Displayable resolution: VGA to WUXGA (non-interlace)
z
Dot clock frequency: up to 162 MHz
z
Color system
7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size
1.02 m -7.62 m (40"-300")
Screen aspect ratio
4 : 3
Projection scheme
Front / Rear / Mount on Ceiling / Floor (Menu setting system)
Speaker
1 (3.7 cm round-type)
Maximum usable volume output
10W
Contrast ratio *
1
2 000 : 1 (all white / all black)
Measurement, measuring conditions and method of notation all comply with ISO21118 international *1 :
standards.
For details of video signals that can be projected using this projector, refer to “List of compatible signals”. *2 :
(
Æ
pages 86-89)
To Next Page
Loading...
