J
joneskyleSep 12, 2025
Why is my Panasonic Pure IP KX-TDE600 PT not ringing?
- JjessegloverSep 12, 2025
If your PT is not ringing, make sure the ringer volume is turned on.
To Next PageTo Next PageWhy is my Panasonic Pure IP KX-TDE600 PT not ringing?
If your PT is not ringing, make sure the ringer volume is turned on.
Why is nothing audible when using the speakerphone on an APT with my Panasonic Pure IP KX-TDE600?
If you can't hear anything when using the speakerphone on an APT, check if the HANDSET/HEADSET selector is set to the "HEADSET" position. If it is, and you're not using a headset, switch the selector to the "HANDSET" position.
Why is nothing audible when using the speakerphone/monitor mode with a DPT on Panasonic Pure IP KX-TDE600 PBX?
If you cannot hear anything when using the speakerphone/monitor mode with a DPT, the "HEADSET" mode may be selected by Personal Programming, "Handset/Headset Selection". When the headset is not in use, select the "HANDSET" mode by Personal Programming.
General| Maximum Trunks | 128 |
|---|---|
| Maximum CO Lines | 128 |
| VoIP Support | Yes |
| Networking | Ethernet |
| Power Supply | AC 100-240V, 50/60Hz |
| VoIP Protocol | SIP, H.323 |
| Rack Mount | Yes |
| Type | IP-PBX |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
