Panasonic PV-615S - Video out; To Monitor Your Recording

To Monitor Your Recording
Your Movie may be connected to a TV to play back
tapes or to monitor what you are recording, Follow
the illustration below for hook-up,
-When Your TV Does Not Have Video In & Audio In Terminals
Using the AC Adaptor
300 ohm-75 ohm transformer
(supplied) or F
RF Converter_
Switch
_---_ Adaptor Connector
VHF VHF Connecting Cable
Antenna (supplied)
.."
UHF
Antenna
To watch TV
1 Turn your Movie OFF.
2 Turn TV ON and select a
channel.
-When Your TV has Video In & Audio In Terminals
Battery Pack I
(supplied)
- Using the Battery Pack
To Audio In
Audio Out
the AC Adaptor. Audio/Video Cable
Q..==_=_._ TO Audio In • . )
VideoOut
AudioNideo
Video
Cable (supplied)
Audio/Video
Adaptor (supplied)
- Using the Car Battery Cord
[]
Out
Cigarette Lighter Socket
To Video In
AudioNideo Cable
(supplied)
Audio
Car Battery Cord
(optional)
- To Monitor
Connect the AC Adaptor to an AC Outlet. 2 Turn your Movie and the "IV ON.
eWhen you use the supplied Audio/Video Output elf your TV has no Video in or Audio In
Adaptor instead of the AC Adaptor, be sure to terminals, select CH 3 or 4 on TV to match the
connect your Movie to a Battery Pack. RF Converter Switch on the AC Adaptor, when
using the VHF Connecting Cable (see top
diagram above).
18