Panasonic PV-GS250 - Printing Pictures by Directly Connecting to the Printer (Pictbridge)

Edit mode
51
LSQT0862
Printing pictures by directly
connecting to the printer (PictBridge)
To print pictures by directly connecting the
Camcorder to the printer, use a printer compatible
with PictBridge. (Read the operating instructions
for the printer.)
pInsert a card and set to Picture Playback
Mode.
1 Connect the Camcorder and the printer with
the supplied USB cable.
 USB cable
pThe [PictBridge] indication appears on the
screen of the Camcorder.
(When the printer is being recognized, the
[PictBridge] indication blinks.)
pWhen no card is inserted in the Camcorder, the
[PictBridge] indication does not appear. (You
cannot print any pictures.)
pWhen the Camcorder and the printer are not
connected properly, the [PictBridge] indication
keeps blinking. (It will blink for just over
1 minute.) Connect the cable or check the
printer.
pWe recommend using the AC adaptor as the
power supply.
pWhen images are displayed in multi-screen,
they cannot be printed.
2 Select [SINGLE PRINT] or [DPOF PRINT].
pIf there is no file with a DPOF setting, you
cannot select [DPOF PRINT].
pWhen you select [DPOF PRINT] for printing
set the number of prints in DPOF setting.
pWhen [DPOF PRINT] is selected, print after
you determine the paper size.
3 Move the joystick left and right to select a
desired picture, and then press it.
4 Select the desired number of prints.
pYou can set up to 9 prints.
5 Select the setting for date printing.
pIf the printer is not capable of date printing,
this setting will be unavailable.
6 Select the paper size.
[STANDARD]: Size specific to the printer
[4M5 INCH]
[5M7 INCH]
[4M6 INCH]
[A4]
pYou cannot set paper sizes not supported on
the printer.
7 Set [PRINT] >> [YES] to start printing.
x
When you stop printing halfway
Move the joystick down.
pAvoid the following operations during printing.
These operations disable proper printing.
pDisconnecting the USB cable
pRemoving the card
pSwitching the mode dial
pTurning off the power
pCheck the settings for the paper size, quality of
print, etc. on the printer.
pYou cannot print pictures that cannot be played
on the Camcorder.
pWhen the Camcorder and the printer are
connected in the Tape Recording/Playback
Mode, the [ WEB] or the [ WEB] Indication
may appear on the LCD monitor. However,
pictures cannot be printed.
1
PictBridge