157
12.2.2.6 Confirming Information
■ Sensor info. ■ Service check
1 Press and hold the 3 buttons
for 4 seconds or more
simultaneously.
, , ►
2 Select the item to set.
▲ ▼ →
Sensor info.
This displays each sensor temperature of the remote controller, indoor units.
3 Select.
(Select the unit number.)
▲ ▼ → ►
4 Confirm the content.
▲ ▼
● Pressing
will return to the Maintenance func
screen.
Service check
This displays the alarm history.
3 Confirm the content.
▲ ▼
Information of 4 errors is displayed.
[---] shows that no error has occurred.
● Pressing
will return to the Maintenance func screen.
● To delete the error history, press
and select [YES].
To Next Page
Loading...
