Panasonic SA-HE75 - Other Settings; Sleep Timer

17
RQT6850
Change this setting to listen to content recorded with Dolby Digital at low
volume (such as late at night) and maintain audio clarity. It reduces the
peak level in loud scenes without affecting the sound field.
OFF: The software is played with the original dynamic range (factory
setting).
STANDARD: The level recommended by the producer of the software
for household viewing.
MAX: The maximum allowable compression (recommended for night
viewing).
11
Press [SFC MODE, <, >] at the same time to enter the
setting mode.
22
Press [SFC MODE, <] to select “DR COMP”.
33
Turn [INPUT SELECTOR] to select “OFF”, “STANDARD”
or “MAX”.
44
Press [SFC MODE, <, >] at the same time to exit the
setting mode.
Dim the unit’s display for better viewing in a darkened room.
The factory setting is OFF (normal brightness).
11
Press [SFC MODE, <, >] at the same time to enter the
setting mode.
22
Press [SFC MODE, <] to select “DIMMER”.
33
Turn [INPUT SELECTOR] to select “OFF” or “ON”.
44
Press [SFC MODE, <, >] at the same time to exit the
setting mode.
Other settings Sleep timer
DR COMP –
Dynamic range compression
DIMMER
SFC MODE
8
INPUT SELECTOR
VOLUME
DOWN UP
SPEAKERS
PHONES
VCR 2
VIDEO IN L AUDIO IN R
DSP
SOUND MODE
DOLBY
PRO LOGIC2
DVD 6CH INPUT TAPE MONITOR
+
–
LR
BASS/TREBLE
BALANCE
PTY SEARCH
DISPLAY MODE
PTY SELECTOR
^
RDS
-BAND
–FM MODE
MEMORYPRESET 2 TUNING 1
-HELP
–RESET
DIGITAL INPUT
INPUT SELECTOR
SFC MODE
<>
Others
The SLEEP timer can turn the unit off after a set time.
It does not control any other components.
11
Press [SLEEP].
SLEEP ,/ OFF
22
Within 5 seconds
Press [–] or [+] to select the required time.
The display changes as follows:
30
,/ 60 ,/ 90 ,/ 120 (minutes)
To check the setting
Press [SLEEP] once.
The time remaining appears.
To change the setting
Repeat the procedure from the beginning.
;;yy
SOUND MODE
SFC TEST
TV / AV
VOLUME
MUTING
SLEEP
+–
//
EFFECT LEVEL
+–
TV VOL
ENTER
DISPLAY RETURN
DIRECT NAVIGATOR PLAY LIST
+–
SLEEP
+–