Step 1: Remove 2 screws.
Step 2 : Remove 2 screws at rear panel.
Step 1 : Remove 10 screws at rear panel.
Step 2 : Detach wire connector (CN5500) at Digital Amp
P.C.B..
Step 3 : Release 2 catches and pull the rear panel backwards
as the arrow shown.
Step 3 : Open and lift up the top cabinet as arrow shown.
8.4. Disassembly of Top Cabinet
8.5. Disassembly of Rear Panel
·
Follow the (Step 1) - (Step 3) of item 8.4. - Disassembly of Top Cabinet
15
SA-HT40EE
To Next Page
Loading...
