·
Disassembly of Panel P.C.B. and Music Port P.C.B.
Step 4 : Remove 9 screws at Panel P.C.B..
Step 5 : Remove 2 screws at Music Port P.C.B..
Step 1 : Remove 5 screws at Main P.C.B..
Step 2 : Disconnect FFC cables (CN400, CN402, CN401,
CN800A, CN802A, CN904A, CN200A and CN403A) at Main
P.C.B. .
Step 3 : Disconnect 2 connectors (CN906 & CN405) at DSP
P.C.B..
·
Disassembly of Volume P.C.B.
Step 6 : Remove 3 screws at Volume P.C.B..
Step 7 : Release 2 clutchs.
Step 4 : Lift up and remove the Main P.C.B. as picture shown.
8.8. Disassembly of Main P.C.B.
·
Follow the (Step 1) - (Step 3) of item 8.4. - Disassembly of Top Cabinet
·
Follow the (Step 1) - (Step 3) of item 8.5. - Disassembly of Rear Panel
17
SA-HT40EE
To Next Page
Loading...
