Step 3 : Lift up and place AC In P.C.B. as picture shown.
Step 1 : Remove 5 screws at Power P.C.B..
Step 2 : Disconnect 2 connectors (CN800A & CN802A) at Main
P.C.B..
Step 3 : Disconnect 1 connector (CN801) at Power P.C.B..
Step 4 : Disconnect 1 connector (CN850) at Digital Amp P.C.B..
Step 5 : Lift up the Power P.C.B. as picture shown.
Note:
Caution when lift up the AC In P.C.B..
8.11. Disassembly of Power P.C.B.
·
Follow the (Step 1) - (Step 3) of item 8.4. - Disassembly of Top Cabinet
·
Follow the (Step 1) - (Step 3) of item 8.10. - Disassembly of AC In P.C.B.
19
SA-HT40EE
To Next Page
Loading...
