Panasonic SC-BTT362 - Radio Antenna Connection; STEP 4: AC Mains Lead Connection

18
VQT3M52
STEP 4: AC mains lead connection
≥ Connect only after all other connections are complete.
A AC mains lead (supplied)
B To a household mains socket
≥The main unit consumes a small amount of AC power, even when it is turned off.
[BTT362] : approx. 0.1 W*, [BTT262]: approx. 0.4 W*
*When the “Quick Start” setting is “Off”
In the interest of power conservation, if you will not be using this unit for a long time, unplug it from the household mains socket.
Radio antenna connection
∫ Using an indoor antenna ∫ Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
A FM indoor antenna (supplied)
B Adhesive tape
Affix this end of the antenna where reception is best.
A
FM outdoor antenna [Using a TV antenna (not supplied)]
The antenna should be installed by a competent technician.
B 75 ≠ coaxial cable (not supplied)
C Antenna plug adaptor
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.


FM ANT
Ω
75
Main unit



FM ANT
75
Ω
e.g.,
Main unit


Main unit
SCBTT362_262_EB_VQT3M52_eng.book 18 ページ ２０１１年１月２５日 火曜日 午後８時２２分