32
Listening to Tapes
(continued)
To stop playback
(Also available from the remote control.)
Press
the stop
button.
Full
auto-stop
When the tape reaches the end, the tape
transport will automati-
cally stop. However, if
you
have set the reverse mode select button
to
CZD
in tn
e
playback mode, the auto-stop function will not
operate.
About the Dolby Noise Reduction system
Using Dolby NR reduces
tape hiss
in the high-frequency range.
It
boosts
the level of
the high-frequency
program content during
re-
cording, and lowers it by the same amount during playback, simul-
taneously
reducing high-frequency
noise
incurred
during the
recording process.
This system has
the
Dolby B-type of noise-reduction
"system. With
Dolby B, noise
is reduced
to
about
one-third.
If you are playing a
tape
that
was recorded
with
Dolby NR, use the Dolby NR mode
during playback.
Dolby noise reduction manufactured
under license from
Dolby Laboratories Licensing Corporation.
"DOLBY" and the
double- D
symbol
are trademarks of
Dolby Laboratories Licensing Corporation.
To Next Page
Loading...
