9
Press
the CD play
button for
automatic re-
cording.
The
recording will start after the
following
steps.
1 . The cassette
deck starts to
rewind the
tape
to the
begin-
ning.
2. The cassette deck
forwards the tape making a
non-record-
ed passage of about
10 seconds and stops to
enter the
recording standby mode.
3. The compact
disc player automatically scans for the
peak
(highest) level of the entire
disc (ATLS;
see page 39.)
and
then recording will start.
When edit-recording has finished, the cassette deck
automati-
cally
enters the recording standby mode.
If you
want to change
something you have set,
or if an error has
occurred, press the
cancel button.
The
system will return to the
previous setting mode.
Note:
When
it is not possible to record all the
tracks even
by
rearranging
the
track
sequence, the OVER display will appear.
To cancel tape
length priority
recording
(fit edit-recording)
(Also
available from the remote control.)
Press
the CD stop
button twice.
The
CLEAR
display will appear.
To confirm the
play sequence
(Also
available from the remote control.)
You
can
confirm the play sequence
on the display
by
pressing the
skip/search button in the stop
mode.
o o
To Next Page
Loading...
