28
VQT3R83
Indicator illumination
The indicators display the condition of this system by flashing. The indicator patterns illustrated below are
displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to
“Troubleshooting” (> 26) if the indicators do not light as illustrated below.
Indicator Description
The indicators blink from left to right (i) or from right to left (s).
≥ When the speaker volume or the subwoofer level is adjusted (> 22)
The indicators blink simultaneously.
≥ When “MUTE” is on (> 22)
The indicator blinks for 10 sec.
≥ When the audio output mode is Multi-channel mode (> 23)
≥ When 3D surround effect and clear-mode dialog effect are on (> 25)
≥ When the dual audio setting is Main (> 25)
The indicators blink for 10 sec.
≥ When the audio output mode is Auto mode (> 23)
The indicator blinks for 10 sec.
≥
When the audio output mode is 2ch mode
(> 23)
≥ When Dolby Virtual Speaker is on (> 25)
≥ When the dual audio setting is Secondary (> 25)
The indicators blink for 10 sec.
≥ When the dual audio setting is Main and Secondary (> 25)
The indicators blink for 10 sec.
≥ When the remote control code is changed (> 25)
The indicators blink once.
≥ When changing the setting (To turn off VIERA Link “HDAVI Control”,
To reduce the clear-mode dialog effect and To turn off the volume
limitation) (> 25)
SC-HTB15EGEBGNGS_VQT3R83.book Page 28 Tuesday, June 28, 2011 2:34 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
