22
TQBJ2338
Specifications
█
General
Dimensions (W x H x D)
Main unit
For table top layout
800 mm x 56 mm x 101 mm
For wall mounting layout
800 mm x 64 mm x 108 mm
Active subwoofer
171 mm x 382 mm x 363 mm
Mass
Main unit
For table top layout 1.9 kg
For wall mounting layout 2.0 kg
Active subwoofer 5.7 kg
Operating temperature range 0°C to +40°C
Operating humidity range
20% to 80% RH (no condensation)
█
Amplifier section
RMS output power: Dolby Digital Mode
Front ch 80 W per channel (4 Ω),
1 kHz, 30% THD
Subwoofer ch 160 W per channel (3 Ω),
100 Hz, 30% THD
Total RMS Dolby Digital mode power
320 W (non-simultaneous drive)
█
Terminals section
HDMI output (ARC)
Terminal Type A (19 pin) connector x 1
Digital audio input
Optical digital input Optical terminal x 1
Sampling frequency 32/44.1/48 kHz
USB Port
USB standard USB 2.0 full speed
Media file format support MP3 (*.mp3)
Sampling frequency 32/44.1/48 kHz
Audio word size 16 bits
Channel count 2 channels
USB device file system FAT16, FAT32
For Software update
█
Audio format section
TV ARC input LPCM (Max 2 ch)
Dolby Digital
DTS
®
Digital Surround
Optical digital input LPCM (Max 2 ch)
Dolby Digital
DTS
®
Digital Surround
█
Speaker section
Front speakers (Built-in)
Full range 4.5 x 12 cm cone type x 2
Active subwoofer
Woofer 16 cm cone type x 1
█
Bluetooth
®
section
Version
Class
Supported profiles
Frequency band
Operation distance
Supported codec
Bluetooth
®
Ver. 4.2
Class 1
AVRCP, A2D P
2.4 GHz band FH-SS
10 m line of sight
SBC
█
Wireless section
Wireless module
Frequency range 2404 MHz to 2476 MHz
RF output power 10 dBm (max)
Note:
• Specifications are subject to change without notice.
Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital
spectrum analyser.
Power supply AC 220 V to 240 V, 50 Hz
Power consumption
Main unit 24 W
Active subwoofer 22 W
Power consumption in standby mode
(approximate)
Main unit
When “Bluetooth
®
Standby” is off 0.5 W
When “Bluetooth
®
Standby” is on 2.0 W
Active subwoofer 0.5 W
To Next Page
Loading...
