Panasonic SC-HTB490 User Manual

14
TQBJ2338
Wireless Connections
Active subwoofer wireless connection
Preparation
Switch on the main unit.
Check that the wireless link is activated.
WIRELESS LINK indicator
On: The wireless link is activated.
Off: The wireless link is not activated.
Blinks: The active subwoofer is trying to activate
the wireless link with the main unit.
Note:
• The wireless link will be activated when the main unit and
the active subwoofer are both switched on.
• The I/D SET button is only used when the main unit is not
paired with the active subwoofer. (~20)
Bluetooth
®
connection
You can connect and play an audio device
wirelessly through Bluetooth
®
.
Preparation
• Switch on the main unit.
• Switch on the Bluetooth
®
feature of the device
and put the device near the system.
• Read the operating instructions of the device for
details.
█ Pairing a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (~below).
1 Press [ –PAIRING].
If the Indicator A blinks fast in blue, continue
with step 3.
2 Press and hold [ –PAIRING] until Indicator
A blinks fast in blue.
3 Select “SC-HTB490” from the Bluetooth
®
menu of the device.
The MAC address (e.g., 6C:5A:B5:B3:1D:0F)
may be shown before “SC-HTB490” is shown.
If prompted for a passkey, input “0000” or
“1234”.
The Indicator A stops blinking and lights up.
Note:
You can pair up to 8 devices with this system. If a 9th device is
paired, the device that has not been used for the longest time
will be replaced.
█ Connecting a paired device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (~below).
1 Press [ –PAIRING].
2 Select “SC-HTB490” from the Bluetooth
®
menu of the device.
Note:
When sound interruption occurs during use with a wireless TV:
– Change the TV to use the 5 GHz wireless range, or
– Adjust the main unit to a position with the least interference,
such as put it in front of the TV instead of below the TV.
█ Disconnecting a device
Press and hold [ –PAIRING].
Note:
• This system can only connect to one device at a time.
• When “Bluetooth
®
” is selected as the source, this system will
automatically try to connect to the last connected device.
• The Bluetooth
®
device will be disconnected when you select
another source.

Panasonic SC-HTB490 Specifications

General

RMS rated power	320 W
Audio output channels	2.1 channels
Surround modes quantity	2
Wi-Fi	No
Bluetooth	Yes
Bluetooth version	4.2
Connectivity technology	Wireless
Soundbar speaker RMS power	160 W
Power consumption (standby)	0.5 W
Product color	Black
Cables included	AC
Number of products included	7 pc(s)
Harmonized System (HS) code	85182200

Weight and Dimensions

Depth	100 mm
Width	800 mm
Height	56 mm
Soundbar weight	8700 g
Subwoofer depth	360 mm
Subwoofer width	170 mm
Subwoofer height	382 mm