11
TQBJ2196
Selecting the placement method
Choose a placement method that suits you best.
When placing the main unit in front of the TV
The main unit may block or interfere with the TV’s various sensors and the 3D Eyewear transmitter of a
3D compatible TV.
If interferences occur, move the main unit further away from the TV. If the TV still does not function
correctly, try using it in a rack or in the wall mount position.
If the TV’s remote control sensor is blocked by the main unit
Try using the TV’s remote control from a different angle.
Note:
• Place the system on a flat safe surface.
• Do not put the system in a metal cabinet.
• Place the active subwoofer within a few meters from the main unit.
• Depending on the position of the active subwoofer, the effect may vary.
Placing the active subwoofer too close to the walls and corners can result in excessive bass. Cover walls and windows with
thick curtains.
You may change the position of the active subwoofer, or adjust the subwoofer level (
~18) to achieve optimum effect.
• Keep other 2.4 GHz and 5 GHz frequency band electronic devices such as wireless router, cordless phone, etc. at least 2 m
away from this system to avoid wireless interference.
• If irregular colouring occurs on the TV, switch off the TV for 30 minutes. If the demagnetising of the TV does not correct the
problem, increase the distance between this system and the TV.
• Keep magnetised items away. Magnetised cards, watches, etc., can be damaged if put too near to the system.
Placing the main unit in a
rack or on a table
Place the main unit on a flat
and horizontal surface.
Attaching the main unit to
a wall
Place the main unit on a flat
and vertical surface.
Page 12
Page 13
TQBJ2196_en.fm Page 11 Tuesday, February 26, 2019 6:32 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
