43
11.4.8. Disassembly of Front Panel Block
• Refer to “Disassembly of Top Cabinet”.
Step 1 : Detach 2P Cable Wire at the connector (CN2206) on
Main P.C.B..
Step 2 : Detach 17P FFC at the connector (CN2205) on Main
P. C . B . .
Step 3 : Detach 11P FFC at the connector (CN2204) on Main
P. C . B . .
Step 4 : Release 2 catches.
Caution: During assembling, ensure that the Front Panel
Block is properly inserted and fully catches onto the Bot-
tom Chassis.
Step 5 : Release 3 catches.
Caution: During assembling, ensure that the Front Panel
Block is properly inserted and fully catches onto the Bot-
tom Chassis.
Step 6 : Release 2 guides.
Caution: During assembling, ensure that the Front Panel
Block is seated properly onto the Bottom Chassis.
To Next Page
Loading...
