45
Caution 1 : During assembling, ensure that the Digital
Transmitter Holder Unit is fully inserted under the hook of
the Front Panel Block.
Caution 2 : During assembling, ensure that the Digital
Transmitter Holder Unit is properly located in between the
2 ribs.
Step 5 : Remove 1 screw.
Step 6 : Release 2 catches.
Caution: During assembling, ensure that the Wireless
Adapter P.C.B. is seated properly onto the guides and fully
catches onto the Digital Transmitter Holder.
Step 7 : Remove the Wireless Adapter P.C.B. and the Digital
Transmitter Module P.C.B. together as shown.
Caution: During assembling, ensure that the Digital Trans-
mitter Module P.C.B. is properly inserted into the slots of
the Digital Transmitter Holder as shown.
To Next Page
Loading...
