46
Step 8 : Remove the Digital Transmitter Module P.C.B. as
shown.
Caution: During assembling, ensure that the Digital Trans-
mitter Module P.C.B. is fully inserted into the Wireless
Adapter P.C.B. as direction with Shield Plate is facing to
Ground Spring.
11.4.10. Disassembly of Power Button
P. C .B .
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Block”.
Step 1 : Remove 1 screw.
Step 2 : Remove the Stopper P.C.B. through the 2P Cable Wire
as shown.
Caution: During assembling, ensure that the Stopper
P.C.B. is seated properly onto the guides of the Front Panel
Block.
To Next Page
Loading...
