EasyManuals Logo

Panasonic SC-PM3 User Manual

Panasonic SC-PM3
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
RQTV0085
9
Cassette tape
Basic play
Basic play
1
Press [0] and insert the cassette.
Insert inside the guidesForward side
2
Close the lid by hand.
3
Press [TAPE 3] to start play.
To play the other side of the cassette, turn the cassette
over.
To Action
stop tape playback Press [ 7 ].
start one-touch play Press [TAPE 3] when the unit is OFF with
the cassette loaded.
fast-forward and
rewind
Press
[ /REW/4] or [ /FF/¢] in the
stop mode.
Note
Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
Endless tapes can get caught up in the deck’s moving parts if used
incorrectly.
TPS (Tape Program Sensor)
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press
[ /REW/4] or [ /FF/¢] during play.
Play resumes from the track found.
Note
TPS may not function properly:
with short silent parts
when noise occurs between tunes
if silent parts are found within tunes
Recording
Recording
Use normal position tapes.
High position and metal position tapes can be used, but this
unit will not be able to record or erase them correctly.
Preparation
Wind the leader tape so that recording can begin
immediately.
Recording the radio
Recording the radio
1
Insert the cassette to be recorded.
2
Tune to the required station (refer to page 10).
3
Press [ REC/8] to start recording.
Recording discs
Recording discs
1
Insert the cassette to be recorded.
2
Press [CD OPEN/CLOSE 0] to insert the disc and
close the lid.
3
Press [CD 3/8] and then [7, -DEMO].
4
Press [PLAY MODE] to select your desired mode
(refer to page 7).
5
Press [ REC/8] to start recording.
Recording programmed tracks
Recording programmed tracks
1
Insert the cassette to be recorded.
2
Program the tracks you want (refer to page 8).
3
Press [ REC/8] to start recording.
Other basic operations
Other basic operations
To Action
erase a recorded
sound
1) Insert the cassette to be recorded.
2) Press [TAPE 3] and then [7, -DEMO].
3) Press [ REC/8].
stop recording Press [ 7 ].
stop recording
temporarily
1) Press [ REC
/8].
2) Press again to resume recording.
record on the other
side of the tape
Turn the cassette over and press
[ REC
/8].
Your attention is drawn to the fact that recording
pre-recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
Erasure prevention
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side ATab for side B
To re-record
Normal tape
Adhesive tape
Disc lid
Top of unit
PM3_EB_En.indd 9PM3_EB_En.indd 9 2/7/06 10:52:56 AM2/7/06 10:52:56 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-PM3 and is the answer not in the manual?

Panasonic SC-PM3 Specifications

General IconGeneral
BrandPanasonic
ModelSC-PM3
CategoryStereo System
LanguageEnglish

Related product manuals