Panasonic SC-PM46 User Manual

RQTV0304
11
Using the timer
Record Timer is applicable for
Southeast Asia
only.
Setting the clock
Setting the clock
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK
˚ PLAY
Original display
˚ REC
Southeast Asia
2
Within 5 seconds, press [ /4] or [ /¢] to set the time.
3
Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust
as necessary.
Using the play or record timer
Using the play or record timer
You can set the timer to come on at a certain time to wake you up
(play timer) or to record from the radio or music port source (record
timer).
Preparation
Turn the unit on and set the clock.
Timer Action
Play timer Prepare the music source you want to listen
to; cassette, disc, radio, USB or music port
source, and set the volume.
Record timer
Southeast Asia
Check the cassette’s erasure prevention
tabs (➡ page 9), insert the cassette
(➡ page 9) and tune to the radio station
(➡ page 10) or select the music port source
(➡ page 13).
1
Press [CLOCK/TIMER] repeatedly to select your desired
timer.
CLOCK ˚ PLAY
Original display
˚ REC
Southeast Asia
2
Within 5 seconds, press [ /4] or [ /¢] to set the
starting time.
Southeast Asia
Play timer indicator
Start time
Record timer indicator
3
4
Press [CLOCK/TIMER] to confirm.
Repeat steps 2 and 3 to set the finishing time.
Southeast Asia
Finish time
To activate the timer
5
Press [˚PLAY] (
Southeast Asia
: [˚PLAY/REC]) to turn on
your desired timer.
Southeast Asia
˚ PLAY
no display (off)
˚ REC
6
Press [y] to turn off the unit.
The unit must be off for the timers to operate.
To Action
change the settings Repeat steps 1 to 4 and 6.
change the source
or volume
1) Press [
˚PLAY] to clear the timer
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings
(when the unit is on
or in standby mode)
Press [CLOCK/TIMER] repeatedly to select
˚PLAY or ˚REC.
cancel Press [˚PLAY] to clear the timer indicators
from the display.
Note
• The play timer and record timer cannot be used together.
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The record timer will start 30 seconds before the set time, with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes on,
the system turns on and engages MUSIC PORT as the source. If
you wish to playback or record from the portable audio equipment,
activate the equipment’s play mode and increase the volume. (See
the portable audio equipment’s instruction manual.)
Using the sleep timer
Using the sleep timer
This function enables you to turn off the unit automatically after the
set time.
Press [SLEEP] repeatedly to select your desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select “OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again
to select your desired time.
Note
• The play and sleep timer or the record and sleep timer can be used
together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
PM46_GN_GCS_En_new11.indd 11PM46_GN_GCS_En_new11.indd 11 1/30/08 5:15:30 PM1/30/08 5:15:30 PM

Panasonic SC-PM46 Specifications

General

RMS rated power	40 W
Number of speakers	2
Type	Home audio micro system
Cassette deck	Yes
Product color	Black
Speaker depth	201 mm
Speaker width	145 mm
Speaker height	227 mm
Dimensions (WxDxH)	164 x 314 x 227 mm
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	1

Weight and Dimensions

Weight	3400 g