Repeat play
You can repeat program play or other selected play mode.
CD
MP3
Press [REPEAT] before or during play.
“REPEAT ON” and “
” are displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “
” is cleared.
Program play
This function allows you to program up to 24 tracks.
CD
1
Press [CD 6] and then [CLEAR 7].
2
Press [PROGRAM].
3
Press the numeric buttons to select your desired track.
Repeat this step to program other tracks.
4
Press [CD 6] to start play.
MP3
1
Press [CD 6] and then [CLEAR 7].
2
Press [PROGRAM].
3
Press [ALBUM or ] to select your desired album.
4
Press [
/¢] once and then the numeric buttons to select
your desired track.
5
Press [ENTER].
Repeat steps 3 to 5 to program other tracks.
6
Press [CD 6] to start play.
For two-digit track, press [h10] once then the two digits.
For three-digit track, press [h10] twice then the three digits.
To Action
cancel program mode Press [PROGRAM] in the stop mode.
replay the program Press [PROGRAM] then [CD 6].
check program
contents
Press
[ /4] or [ /¢] when “PGM” is
displayed in the stop mode.To check while
programming, press [PROGRAM] twice
after “PGM” appears, then press
[ /4]
or [ /¢].
add to the program
CD
Repeat step 3 in the stop mode.
MP3
Repeat steps 3 to 5 in the stop mode.
clear the last track Press [DEL] in the stop mode.
clear all programmed
tracks
Press [CLEAR 7] in the stop mode.
“CLR ALL” is displayed. Within 5 seconds,
press the button again to clear all tracks.
Note
•
When you try to program more than 24 tracks “PGM FULL” appears.
• The program memory is cleared when you open the disc tray.
CD
• During program play, you can search backward or forward only
within the current track.
Basic play
CD
MP3
1
Press [y] to turn the unit on.
2
Press [0] to open the tray and then load the disc.
Press [0] again to close the tray.
Label must
face upward
Disc tray
3
Press [CD 6] to start play.
4
Adjust the volume.
To Action
stop the disc Press [CLEAR 7].
pause play Press [CD 6].
Press again to resume play.
skip tracks Press
[ /4] or [ /¢].
search through
tracks
CD
Press and hold [ /4] or [ /¢] during
play or pause.
skip album
MP3
Press [ALBUM or ] in the play mode.
Press [ALBUM
or ] once and then the
numeric buttons in the stop mode.
Play Mode function
CD
MP3
1
Press [CD 6].
2
Press [PLAY MODE] to select the desired mode.
Mode To play
1-TRACK
1TR
one selected track on the disc.
Press the numeric buttons to select the track.
1-ALBUM
1ALBUM
MP3
one selected album on the disc.
Press [ALBUM
or ] to select the album.
RANDOM
RND
a disc randomly.
1-ALBUM
RANDOM
1ALBUM RND
MP3
all tracks in one selected album randomly.
Press [ALBUM
or ] to select the album.
Note
• During RANDOM or 1-ALBUM RANDOM play, you cannot skip to
tracks that have been played.
• The current play mode is cleared when you open the disc tray.
CD
• During RANDOM play, you can search backward or forward only
within the current track.
Display function
This function allows you to display the information of the current track.
Press [DISPLAY] repeatedly during play or pause mode.
CD
Elapsed play time Remaining play time
MP3
Elapsed time Album name Track name
ID3 (Artist)
ID3 (Track)
ID3 (Album)
Note
• Maximum number of displayable characters: approximately 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about
the track.
PM46_GN_GCS_En_new11.indd 8PM46_GN_GCS_En_new11.indd 8 1/30/08 5:15:26 PM1/30/08 5:15:26 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
