Panasonic SC-PM46 User Manual

RQTV0304
12
Using sound effects
Selecting sound effects
Selecting sound effects
You can change the sound effect by selecting Preset EQ or adjusting
the bass or treble effect.
Preset EQ
Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY
→ CLEAR → SOFT → VOCAL → EQ-OFF
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
EQ-OFF No effect
Bass or treble
Bass or treble
Enable you to enjoy the lower or higher pitch sound.
1
Press [BASS/TREBLE] repeatedly to select your desired
setting.
BASS TREBLE
original display
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
2
Press [ /4] or [ /¢] to adjust the level.
Note
The tone level can be varied within -4 to +4.
Enjoying surround sound
Enjoying surround sound
Enable you to add natural width and depth to the stereo sound.
To activate
Press [SURROUND] to display “
” indicator.
To cancel
Press [SURROUND] again to clear “ ” indicator.
Note
• Surround sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the
surround sound effect.
Using other equipment
USB
Connecting and playing a USB
Connecting and playing a USB
mass storage class device
mass storage class device
MP3
The USB connectivity enables you to connect and play MP3 tracks
from USB mass storage class. Typically, USB memory devices (Bulk
only transfer).
Preparation
Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The USB
device is not recognised by this unit.
USB enabled device
(not included)
It is not recommended
to use a USB extension
cable. The device
connected via the cable
will not be recognised by
this unit.
1
Reduce the volume and connect the USB mass storage
device.
2
Press [USB 6] to start play.
To Action
pause play Press [USB 6].
Press again to resume play.
stop play Press [CLEAR 7].
“RESUME” is displayed. The position is
memorized.
Press [USB 6] to resume.
Press [CLEAR 7] again to clear the position.
skip track Press [ /4] or [ /¢] .
skip album Press [ALBUM
or ] in the play mode.
Press [ALBUM
or ] once and then
the numeric buttons in the stop mode.
Display function
Display function
Press [DISPLAY] repeatedly during play or pause mode.
Elapsed time Remaining time Album name Track name
ID3 (Artist) ID3 (Track) ID3 (Album)
For other operating functions, they are similar as those described in
“Discs” (➡ page 8).
PM46_GN_GCS_En_new11.indd 12PM46_GN_GCS_En_new11.indd 12 1/30/08 5:15:31 PM1/30/08 5:15:31 PM

Panasonic SC-PM46 Specifications

General

RMS rated power	40 W
Number of speakers	2
Type	Home audio micro system
Cassette deck	Yes
Product color	Black
Speaker depth	201 mm
Speaker width	145 mm
Speaker height	227 mm
Dimensions (WxDxH)	164 x 314 x 227 mm
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	1

Weight and Dimensions

Weight	3400 g