Panasonic SD-253 - Page 15

1. Disconnect the power cord connectors.
2. Push the cord bushing A and push out the power cord B.
Fig.13
No. Parts Name
1 Angle
2 Cord bushing
3 Power cord
1. Remove the connectors and Faston terminals from P.C.
Board B.
2. Remove the screw from the P.C.B. holder.
Fig.14
No. Parts Name
1 Power cord
2 Cord bushing
3 Angle
Fig.15
No. Parts Name
1 Angle Unit
2 P.C. Board B
3 P.C.B. holder
4 Screw
3.8. Power cord
3.9. P.C. Board B
15
SD-253