Panasonic SD-253 - Page 14

1. As shown in the figure, turn the body upside down with the
power cord stored inside the angel unit to prevent damage
to the cord.
1. Remove the six screws labeled F.
2. Turn the body upside down and pull the body out of the
heater case assembly.
Fig.11
No. Parts Name
1 Screw F
Fig.10
No. Parts Name
1 Power cord
2 Body Ass’y
Fig.12
No. Parts Name
1 Heater case Ass’y
2 Power cord
3 Body Ass’y
3.6. Power cord
3.7. Body
14
SD-253