Panasonic TC-29PS70R - Pal Colour Output; Ntsc Colour Output

5.6. PAL COLOUR OUTPUT
Item/Preparation Adjustment Procedure
1. Receive PAL colour bar pattern.
2. Connect an oscilloscope probe to TPA 37 or TPL2 (G OUT).
3. Connect a short jumper to FBT pin 3 or TPA34 and TPA5.
4. Set control :
Picture menu.....................DYNA MIC NORMAL
AI................ .................... ..off
1. Adjust Bright Control.
a = 2.3 ± 0.5Vp-p
2. Adjust Sub Colour control.
3. Connect the oscilloscope probe to TPA40.
4. Connect the waveform.
b = 3.1 ± 0.5Vp-p
5.7. NTSC COLOUR OUTPUT
Item/Preparation Adjustment Procedure
1. Apply 3.58MHz NTSC Rainbow pattern.
2. Connect an oscilloscope to TPA36 or TPL1 (R OUT).
3. Connect a short jumper to FBT pin 3 or TPA34 and TPA5.
4. Set control :
Picture menu.......................DYN AMIC CONTROL
Channel Colour Set...........ST D
1. Adjust Bright Control.
a = 2.3 ± 0.2Vp-p
2. Connect the waveform.
b = 1.3 ± 0.5Vp-p
9
TC-29PS70R