Panasonic TGP600

25
is set to “Y” or “X_PANASONIC_IPTEL_APPLICATION”, when the corresponding key is pressed, the phone
accesses to the URL, “XMLAPP_INITIAL_URL”, adding CGI parameter of initiation key information.
e.g.)
Model: HDV130
HTTP GET /xmlpath/xmlapl.cgi ?initiationkey=SOFT1
or
HTTP GET /xmlpath/xmlapl.cgi ?initiationkey=PK1
Model: HDV230
HTTP GET /xmlpath/xmlapl.cgi ?initiationkey=SOFT1
or
HTTP GET /xmlpath/xmlapl.cgi ?initiationkey=FF1
or
HTTP GET /xmlpath/xmlapl.cgi ?initiationkey=DSS1
Model: HDV330/430
HTTP GET /xmlpath/xmlapl.cgi ?initiationkey=FF1
or
HTTP GET /xmlpath/xmlapl.cgi ?initiationkey=DSS1
This operation is only effective in the idle state of the phone.