Panasonic TH-103PF10WK - Board Removal: CX-Board

TH-103PF10WK/TK/RK
44
4. Remove 6 screws of the flexible cable.
5. Remove the flexible cables from the connectors ( C90,
C91, C93,CB9, CB10, CB11).
6. Disconnect the connectors (C92, C94).
7. Remove 5 screws and then remove C9-Board.
7.35. Removal of CX-Board
1. Remove the Rear Cover Angle (D), (G), (H).
(Refer to Removal of C9-Board)
2. Remove the Reinforcement Angle (D).
(Refer to Removal of C9-Board)
3. Remove 6 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CB6,
CB7, CB8, CX1, CX2).
5. Disconnect the connector (CX4).
6. Remove 5 screws and then remove CX-Board.
7.36. Removal of CY-Board
1. Remove 2 screws ( ) and then the Rear Cover Angle
(G).
2. Remove 2 Eye Bolt Covers.
3. Remove 5 screws ( ) and then remove the Rear Cover
Angle (B).
4. Remove 2 screws ( ) of Side Angle (R).