Panasonic TH-42PH10BK - Removal of SC-Board; Removal of SS-Board; Removal of C1, C2-Board

6.11. Removal of SC-Board
1. Disconnect the connectors (SU45, SD46).
2. Remove 3 screws (
) and then slide SU-Board and SD-
Board to the left.
3. Disconnect the connectors (SC2, SC20).
4. Remove 6 screws and then remove SC-Board.
6.12. Removal of SS-Board
1. Disconnect the connectors (SS11, SS12, SS23, SS34).
2. Remove the Flexible Cables from the connectors (SS53A,
SS54A, SS55A, SS56A).
3. Remove 6 screws and then remove SS-Board.
6.13. Removal of C1, C2-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 6 screws and then remove the Stand Block (L, R).
6.13.1. Removal of C1-Board
1. Remove the Flexible Cables from the connectors (C10,
C11).
2. Remove 8 screws (
) and then remove the Flexible Cables
from the connectors (CB1, CB2, CB3, CB4).
3. Remove 4 screws (
) and then remove C1-Board.
12
TH-42PH10BK / TH-42PH10BS / TH-42PH10EK / TH-42PH10ES