16. Remove SU-Board and SD-Board.
(Refer to Removal of SU-Board and SD-Board)
17. Remove 6 screws and then remove SC-Board.
18. Disconnect the connectors (SS23, SS34).
19. Remove the Flexible Cables from the connectors (SS53A,
SS54A, SS55A, SS56A).
20. Remove 6 screws and then remove SS-Board.
21. Remove 2 screws ( ) and then remove the S1-Board Block.
22. Remove 3 screws (
) and then remove the AC-Inlet Block.
23. Remove the Flexible Cables from the connector (C10).
24. Remove 6 screws of the Escutcheon.
25. Remove the 12 Spacers and Spacer Rings from the Plasma
Panel.
16
TH-42PH10BK / TH-42PH10BS / TH-42PH10EK / TH-42PH10ES
To Next Page
Loading...
